STS AWD V6-3.6L (2007)
Transmission Pressure Test Port: Service and Repair
5L40-E/5L50-E - Automatic Transmission
Automatic Transmission Fluid Pressure Test Hole Plug Replacement
Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove and discard the oil pressure test plug.
Installation Procedure
Notice: Refer to Fastener Notice.
1. Install a NEW oil pressure test plug.
Tighten the oil pressure test plug to 11 N.m (97 lb in).
2. Check the transmission fluid level (fill if necessary). Refer to Transmission Fluid Checking.
3. Lower the vehicle.
