STS AWD V6-3.6L (2007)
6. Disconnect the electrical connector for the differential cooler (1).
7. Remove the differential cooler wiring harness from the retainer on the frame.
8. Remove the hose from the differential coolant pump to the cooler.
9. Remove the mounting nuts (2) for the differential cooler assembly.
10. Remove the differential cooler assembly (3).
11. Disconnect the electrical connector for the differential cooler fan (4).
12. Remove the retaining nuts for the differential cooler (5).
13. Remove the differential cooler (6) from the carrier (7).
Installation Procedure
1. Install the differential cooler (6) in the carrier.
Notice: Refer to Fastener Notice.