STS AWD V6-3.6L (2007)
Notice: Refer to Fastener Notice.
1. Install the hose (4) and clamp (1) from the cooler (5) to the pump (6).
Tighten the clamp to 3 N.m (27 lb in).
2. Install the inlet hose (3) and clamp (1) to the cooler (5).
Tighten the clamp to 3 N.m (27 lb in).
3. Install the outlet hose (2) and clamp (1) to the pump (6).
Tighten the clamp to 3 N.m (27 lb in).
4. Install the differential cooler assembly.
5. Fill the differential. Refer to Lubricant Change (W/O Differential Cooler).
