STS AWD V6-3.6L (2007)
6. Install the J 45012 to the drive pinion flange.
7. While holding the J 45012 remove the drive pinion flange nut.
8. Remove J 45012 from the drive pinion flange.
9. Install the J 45019 to the drive pinion flange.
10. Using J 45019 remove the drive pinion flange.
11. Remove the J 45019 from the drive pinion flange.
12. Using a flat-bladed tool carefully remove the drive pinion seal. Take care not to damage any sealing surfaces.
Installation Procedure
1. Lubricate the drive pinion flange sealing surface of the drive pinion seal with synthetic gear oil GM P/N 12378514 (Canadian P/N 88901045) or
equivalent.
2. Install the drive pinion seal to the J 46262.
