STS AWD V8-4.6L VIN A (2006)
2. Install the park brake pedal and front park brake cable assembly (1) to the mounting bracket.
3. Install the park brake pedal assembly attaching nuts (3).
Tighten the park brake pedal assembly mounting nuts to 25 Nm (18 ft. lbs.).
Notice: Refer to Fastener Notice in Service Precautions.
4. Install the park brake pedal assembly cross bar mounting bolt (2).
Tighten the park brake pedal cross bar mounting bolt to 10 Nm (88 inch lbs.).
5. Install the grommet to the floor pan.
6. Connect the electrical connector to the park brake warning lamp switch.
7. Install the park brake warning lamp switch wiring harness retainer to the park brake pedal assembly.
8. Reposition the carpet.
9. Install the left front carpet retainer.
