STS AWD V8-4.6L VIN A (2006)
Heat Shield: Service and Repair
Exhaust Manifold Heat Shield Replacement - Right
Exhaust Manifold Heat Shield Replacement - Right (LH2)
Removal Procedure
Caution: Refer to Exhaust Service Caution in Service Precautions.
Caution: Refer to Protective Goggles and Glove Caution in Service Precautions.
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
2. Remove the bolts securing the exhaust manifold heat shield to the exhaust manifold.
3. Remove the heat shield from the engine.
Installation Procedure
1. Install the exhaust manifold heat shield to the engine .
2. Notice: Refer to Fastener Notice in Service Precautions.
Install the bolts securing the exhaust manifold heat shield to the manifold.
^
Tighten the bolts to 10 Nm (89 inch lbs.).
3. Lower the vehicle.