STS AWD V8-4.6L VIN A (2006)
1. Connect the air inlet assembly electrical connector (1).
2. Install the air inlet assembly (1) to the locator pin.
3. Install the upper air inlet assembly bolts (1).
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the bolt to 9 N.m (80 lb in).
4. Install the lower right air inlet assembly bolt (1).
Tighten the bolt to 9 N.m (80 lb in).
5. Install the I/P compartment.
6. Install the closeout panel.