STS AWD V8-4.6L VIN A (2006)
2. Reposition the engine wiring harness into place.
3. Install the heater pipe assembly retaining nuts.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the nuts to 9 N.m (80 lb in)
4. Install the battery tray.
5. Using J 38185, disengage the hose clamps and connect the heater pipe assembly to the heater core.
6. Using J 38185, disengage the hose clamp and connect the surge tank outlet hose to the heater pipe assembly.