STS AWD V8-4.6L VIN A (2006)
2. Install the tire hoist assembly to the underbody.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the tire hoist mounting assembly bolts.
Tighten the tire hoist assembly mounting bolts to 25 Nm (18 ft. lbs.).
4. Install the spare tire to the hoist.
5. Turn the hoist shaft clockwise until the spare tire is in position and the hoist clicks 2 times or it skips twice. You cannot overtighten the cable.
Notice: Use only hand tools to lower and raise the spare tire hoist assembly. Do not use air tools. The use of air tools at high speeds will damage
the spare tire hoist assembly.
6. Remove the safety stands.
7. Lower the vehicle.
