STS AWD V8-4.6L VIN A (2006)
Variable Valve Timing Actuator: Service and Repair
Camshaft Position (CMP) Actuator Replacement - Bank 2 (Left) Intake
Camshaft Position (CMP) Actuator Replacement - Bank 2 (Left) Intake
Removal Procedure
1. Remove the left intake camshaft position actuator oil control valve (10).
2. Pull the actuator forward to disengage the camshaft alignment pin from the actuator.
3. Disengage the secondary timing chain from the actuator and remove the actuator.
Installation Procedure
1. Locate the camshaft alignment pin hole (2) on the back of the actuator.
