STS AWD V8-4.6L VIN A (2006)
Canister Purge Solenoid: Service and Repair
EVAPORATIVE EMISSION CANISTER PURGE SOLENOID VALVE REPLACEMENT
REMOVAL PROCEDURE
1. Loosen the fuel cap in order to relieve the system pressure.
2. Remove the fuel injector sight shield.
3. Disconnect the evaporative emission (EVAP) canister purge valve electrical connector (1).
4. Disconnect the EVAP purge pipe (2) from the EVAP canister purge valve.
5. Remove the EVAP canister purge valve retaining bolt.
6. Remove the EVAP canister purge valve from the water housing.
INSTALLATION PROCEDURE
1. Lubricate the O-ring with clean engine oil.
IMPORTANT: Be sure to install a new O-ring on the EVAP purge valve.
