STS AWD V8-4.6L VIN A (2006)
Camshaft Position Sensor: Service and Repair
Camshaft Position Sensor Replacement - Bank 1 (Right Side) Intake
CAMSHAFT POSITION SENSOR REPLACEMENT - BANK 1 (RIGHT SIDE) INTAKE
REMOVAL PROCEDURE
1. Remove the fuel injector sight shield.
2. Disconnect the electrical connector from the right bank intake camshaft position sensor (1).
IMPORTANT: When disconnecting more than one sensor, mark the connectors to ensure correct re-installation. The electrical connectors are
physically interchangeable, however, they must be installed to the correct sensor.
3. Remove the camshaft sensor retaining bolt.
4. Remove the right bank intake camshaft sensor (2).
INSTALLATION PROCEDURE