STS AWD V8-4.6L VIN A (2006)
Seat Belt: Technical Service Bulletins
Restraints - Seat Belt Stop Button Availability
Bulletin No.: 04-09-40-002A
Date: November 08, 2006
INFORMATION
Subject:
Seat Belt Stop Button Kits Available
Models:
2003-2007 Cadillac CTS, STS
2004-2007 Cadillac SRX, XLR
2006-2007 Cadillac DTS
Supercede:
This bulletin is being revised to add additional models, model years and part numbers. Please discard Corporate Bulletin Number 04-09-40-002 (Section
09 - Restraints).
Recently entire seat belt assemblies from the above listed vehicles were returned to the Warranty Parts Center (WPC) for detachment of the seat belt stop
button. The purpose of this bulletin is to advise dealers that replacement of the entire seat belt assembly is NOT required if a stop button becomes broken
or missing. A service kit for the Seat Belt Latch Plate Stop (button) is now available from GMSPO.
Stop Button Installation
Position the seat belt latch plate above the seat belt button hole.
On the front side of the seat belt, insert the male button half into the existing hole.
On the opposite side of the seat belt, position the mating button half.
Apply pressure to both button halves to engage.
