cadillac Workshop Repair Guides

Cadillac Workshop Service and Repair Manuals

ABOUT US
Power Steering Reservoir Inlet Pipe/Hose Replacement|Page 16484 > < Power Steering Reservoir Inlet Pipe/Hose Replacement|Page 16482

STS AWD V8-4.6L VIN A (2006)

Page 3
background image

1. Install the power steering hose to the vehicle.

2. Install the power steering gear inlet hose to power steering gear retaining bolt.

Tighten the bolt to 23 Nm (17 inch lbs.).

Notice:  Refer to Fastener Notice in Service Precautions.

3. Install the power steering gear inlet hose to frame mounting bolts.

Tighten the bolts to 4 Nm (35 inch lbs.).

Power Steering Reservoir Inlet Pipe/Hose Replacement|Page 16484 > < Power Steering Reservoir Inlet Pipe/Hose Replacement|Page 16482