STS AWD V8-4.6L VIN A (2006)
Control Arm: Service and Repair
Front
This article has been updated by TSB Bulletin No. 06-03-08-006
Date: May 17, 2006
SERVICE MANUAL UPDATE
Subject:
Revised Front Lower Control Arm Ball Stud Retaining Nut Fastener Tightening Specification
Models:
2003-2006 Cadillac CTS, SRX, STS
Lower Control Arm Replacement
Tools Required
^
J43631 Ball Joint Remover
Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the tire and wheel.
3. Remove the shock module yoke.
4. Remove the stabilizer shaft link lower retaining nut.
5. Remove the stabilizer shaft link from the lower control arm.
6. Remove the ABS wire harness from the lower control arm.