STS AWD V8-4.6L VIN A (2006)
Headlamp Washer Hose: Service and Repair
HOSE REPLACEMENT - HEADLAMP WASHER
REMOVAL PROCEDURE
1. Remove the front air deflector.
2. Remove the radiator support sight shield.
3. Drain the washer solvent into a suitable container.
4. Disconnect the headlamp washer hose (1) quick connect (3) from the washer pump nozzle located on the rear outboard corner of the washer
solvent reservoir.
5. Remove the left front headlamp.
6. Disconnect the headlamp washer hose quick connects from the headlamp washer nozzles located on the bottom side of the headlamps.
7. Disconnect the washer hose clips from the fascia.
8. Remove the washer hose assembly from the vehicle.
INSTALLATION PROCEDURE
