STS RWD V6-3.6L (2007)
6. Install the EVAP hose to the fuel filter bracket:
Notice: Refer to Fastener Notice
7. Install the fuel filter bracket bolt.
Tighten the fuel filter bracket bolt to 9 N.m (80 lb in).
8. Install the fuel/brake bundle to the underbody.
9. Complete the following in order to install the chassis hose/pipes to the retainers (2) located at the rearward portion of the rail:
1. Install the chassis hose/pipes into the retainers (2).
2. Close the retainers (2) at the top.
3. Insert the retainers (2) into the rail.
10. Install the chassis hose/pipes into the retainers (1) located at the forward portion of the rail.
11. Close the retainers.
12. Push the locking mechanism (1) inward in order to engage the fuel/brake bundle chassis pipe retainers to the rail.
