STS RWD V8-4.6L (2007)
Cellular Phone Microphone: Service and Repair
Radio Volume Compensator Interior Noise Microphone Replacement
Removal Procedure
1. Remove the overhead console.
2. Remove the screws securing the microphone (2) to the overhead console.
3. Disconnect the electrical connector.
Installation Procedure
1. Connect the electrical connectors.
Notice: Refer to Fastener Notice.
2. Install the screws securing the microphone (2) to the overhead console.
Tighten the screws to 2 N.m (18 lb in).
3. Install the overhead console.