STS RWD V8-4.6L (2007)
Console: Service and Repair
Ashtray Replacement
Ashtray Replacement
Removal Procedure
1. Remove the center instrument panel trim.
2. Remove the 4 screws (1) securing the ashtray.
3. Disconnect the electrical connectors.
Installation Procedure
1. Connect the electrical connectors.
Notice: Refer to Fastener Notice.
2. Install the 4 screws (1) securing the ashtray.
Tighten the screws (1) to 9 N.m (80 lb in).
3. Install the center instrument panel trim.