STS RWD V8-4.6L (2007)
Installation Procedure
1. Position the new headliner upside down, on a clean protected surface.
2. Transfer the antenna module (2) to the new headliner.
3. Attach the antenna module (2) to the bracket.
4. Connect the electrical connector (1).
5. Connect the 2 coaxial cables (3, 4).
6. Ensure the antenna module ground strap is positioned properly to the headliner.
7. Install the rear dome lamp bezel (1) to the headliner.
Important: Ensure the bolt is placed through the antenna module ground strap.
8. Loosely install the fastener.
9. Install the side assist handle retainers (2).
10. Install the assist handles and loosely install the fasteners in the integral retainer clips in order to hold the handles into position.
