STS RWD V8-4.6L (2007)
6. Install the push in retainers (1) to the back of the seat back cover.
7. Install the J channels to retain the rear seat back cover and foam pad to the seat back frame.
8. Install the seat back to the seat frame.
Notice: Refer to Fastener Notice.
9. Install the split fold seat pivot nut (1).
Tighten the nut to 42 N.m (31 lb ft).
10. Use the following procedures if the seat back is equipped with center head restraints:
*
Align the head restraint mounting holes with the seat covers.
*
Cut holes in the seat back cover in order to install the head restraint retainers
11. Install the head restraint retainers.
12. Install the seat back.
13. Install the head restraints.
Front Seat Back Panel Replacement
Front Seat Back Panel Replacement
