STS RWD V8-4.6L (2007)
21. If the brake pedal feels spongy, repeat the bleeding procedure again. If the brake pedal still feels spongy after repeating the bleeding procedure,
perform the following steps:
1. Inspect the brake system for external leaks.
2. Pressure bleed the hydraulic brake system in order to purge any air that may still be trapped in the system.
22. Turn the ignition key ON, with the engine OFF. Check to see if the brake system warning lamp remains illuminated.
Important: DO NOT allow the vehicle to be driven until it is diagnosed and repaired.
23. If the brake system warning lamp remains illuminated, refer to Symptoms - Hydraulic Brakes. See: Hydraulic System/Testing and
Inspection/Symptom Related Diagnostic Procedures/Symptoms - Hydraulic Brakes
