STS RWD V8-4.6L (2007)
6. Install the brake pad retainers (1) to the brake caliper bracket (3).
7. Install the brake pads (2) to the brake caliper bracket (3).
8. Install the brake caliper (1) to the front brake caliper bracket (2).
Rear Brake Caliper Bracket Replacement
Rear Brake Caliper Bracket Replacement
Caution: Refer to Brake Dust Caution.
Removal Procedure
Notice: Support the brake caliper with heavy mechanic wire, or equivalent, whenever it is separated from its mount and the hydraulic flexible
brake hose is still connected. Failure to support the caliper in this manner will cause the flexible brake hose to bear the weight of the caliper, which
may cause damage to the brake hose and in turn may cause a brake fluid leak.
1. Remove the brake caliper (2) from the brake caliper bracket (3) and support the brake caliper (2) with heavy mechanic's wire (1), or equivalent.
Do NOT disconnect the hydraulic brake flexible hose from the caliper.
2. Remove the brake pads (2) from the brake caliper bracket (3).