STS RWD V8-4.6L (2007)
5. Remove the front brake hose bracket to steering knuckle mounting bolts (1),
Important: Install a rubber cap or plug to the exposed brake pipe fitting end in order to prevent brake fluid loss and contamination.
6. Disconnect the brake pipe fitting (1) from the brake hose (3), than cap or plug the brake pipe fitting end.
7. Lift the retaining clip over the end of the brake hose.
8. Using a flat-bladed tool, remove the brake hose retainer (2) from the brake hose (3).
9. Remove the brake hose (1) from the brake hose bracket (2).