STS RWD V8-4.6L (2007)
Parking Brake Cable: Service and Repair
Park Brake Cable Mounting Bracket Replacement
Park Brake Cable Mounting Bracket Replacement
Tools Required
J 37043 Parking Brake Cable Release Tool
Caution: Refer to Brake Dust Caution.
Removal Procedure
1. Raise the vehicle and suitably support. Refer to Vehicle Lifting.
2. Remove the rear tire and wheel assembly.
3. Pull down on the intermediate park brake cable (2) near the park brake cable connector (1).
4. Disconnect the intermediate park brake cable (2) from the park brake connector (1).
5. Use the J 37043 in order to depress the rear brake cable retainer.
6. Remove the rear park brake cable from the rear cable bracket (1).
7. Disconnect the park brake cable (2) from the park brake actuator lever (3).
8. Remove the park brake cable bracket mounting bolts.
9. Remove the park brake cable bracket.
Installation Procedure
