STS RWD V8-4.6L (2007)
Notice: Refer to Fastener Notice.
2. Install the mode actuator screws (2).
Tighten the screws to 1 N.m (9 lb in).
3. Connect the electrical connector to the actuator.
4. Install the I/P carrier.
Notice: Refer to Fastener Notice.
2. Install the mode actuator screws (2).
Tighten the screws to 1 N.m (9 lb in).
3. Connect the electrical connector to the actuator.
4. Install the I/P carrier.