STS RWD V8-4.6L (2007)
4. Install the air inlet assembly.
Air Temperature Actuator Replacement - Left Side
Air Temperature Actuator Replacement - Left Side
Removal Procedure
1. Remove the left closeout panel.
2. Disconnect the left air temperature actuator electrical connector from the actuator.
3. Remove the left air temperature actuator screws.
4. Remove the left air temperature actuator.
Installation Procedure
1. Install the left air temperature actuator.
Notice: Refer to Fastener Notice.
2. Install the left air temperature actuator screws.
Tighten the screws to 1 N.m (9 lb in).
