STS RWD V8-4.6L (2007)
1. Install the blower motor.
Notice: Refer to Fastener Notice.
2. Install the blower motor screws (1).
Tighten the screws to 1.5 N.m (13 lb in).
3. Install the air inlet housing bolts.
Tighten the screws to 6 N.m (53 lb in).
4. Connect the blower motor processor electrical connector.
5. Connect the blower motor electrical connector.
6. Install the I/P compartment.
7. Install the right closeout insulator panel.