STS RWD V8-4.6L (2007)
3. Remove the MAF/IAT sensor screws.
Notice:
*
Handle the MAF sensor carefully.
*
Do not drop the MAF sensor in order to prevent damage to the MAF sensor.
*
Do not damage the screen located on the air inlet end of the MAF.
*
Do not touch the sensing elements.
*
Do not allow solvents and lubricants to come in contact with the sensing elements.
*
Use a small amount of a soap based solution in order to aid in the installation.
Carefully remove the MAF/IAT sensor from the air cleaner housing cover.
4. Discard the MAF/IAT sensor gasket.
Installation Procedure
Notice:
*
Handle the MAF sensor carefully.
*
Do not drop the MAF sensor in order to prevent damage to the MAF sensor.
*
Do not damage the screen located on the air inlet end of the MAF.