STS RWD V8-4.6L (2007)
Important: Inspect the camshaft sensor O-ring for wear or damage. If a problem is found, replace the O-ring.
1. Lubricate the camshaft sensor O-ring with engine oil.
Notice: Refer to Fastener Notice.
2. Install the right bank intake camshaft position sensor (2) and retaining bolt.
Tighten the retaining bolt to 10 N.m (89 lb in).
3. Reconnect the camshaft sensor electrical connector (1).
4. Install the fuel injector sight shield.
5. Operate the engine and inspect the camshaft sensor for engine oil leaks.