STS RWD V8-4.6L (2007)
*
Do not touch the sensing elements.
*
Do not allow solvents and lubricants to come in contact with the sensing elements.
*
Use a small amount of a soap based solution in order to aid in the installation.
Install a NEW MAF/IAT sensor gasket.
2. Carefully install the MAF/IAT sensor into the air cleaner housing cover.
Notice: Refer to Fastener Notice.
3. Install the MAF/IAT sensor screws.
Tighten the screws to 4 N.m (35 lb in).
4. Install the air cleaner outlet duct.
5. Reconnect the MAF/IAT sensor electrical connector.