cadillac Workshop Repair Guides

Cadillac Workshop Service and Repair Manuals

Inflatable Restraint Instrument Panel Module Replacement|Page 15532 > < Air Bag Systems|Locations|Page 15529
Page 1
background image

Air Bag: Service and Repair
Inflatable Restraint Instrument Panel Module Replacement

Inflatable Restraint Instrument Panel Module Replacement

Removal Procedure

Caution:  Refer to SIR Inflator Module Handling and Storage Caution.

Caution:  A deployed dual stage inflator module will look the same whether one or both stages were used. Always assume a deployed dual
stage inflator module has an active stage 2. Improper handling or servicing can activate the inflator module and cause personal injury.

Caution:  Refer to Restraint System Service Precautions.

1. Disable the SIR system. Refer to SIR Disabling and Enabling.
2. Remove the instrument panel (I/P) retainer.

3. Note the wire harness routing position on the I/P module, to help in assembly.

4. Remove the I/P module mounting fasteners.
5. Remove the I/P module from the I/P.

Installation Procedure

1. Route the I/P module pigtail down through the I/P.
2. Install the I/P module to the instrument panel.

Notice:  Refer to Fastener Notice.

3. Install the I/P module mounting fasteners.

Tighten the fasteners to 9 N.m (80 lb in).

Inflatable Restraint Instrument Panel Module Replacement|Page 15532 > < Air Bag Systems|Locations|Page 15529