STS RWD V8-4.6L (2007)
Air Bag: Service and Repair
Inflatable Restraint Side Impact Module Replacement - Front
Inflatable Restraint Side Impact Module Replacement - Front
Removal Procedure
Caution: Refer to SIR Inflator Module Handling and Storage Caution.
Caution: Following the deployment of a side impact air bag, inspect the following parts for damage. Replace these parts if necessary:
*
The seat cushion frame
*
The seat recliner, if equipped
*
The seat adjuster
*
The seat back frame
1. Failure to do so may cause future personal injury.
Disable the SIR system. Refer to SIR Disabling and Enabling.
Important: Removal of the right or the left inflatable restraint side impact module uses the same procedure.
2. Move the seat to the full forward position.
3. Remove the seat back panel cover (2) from the seat (1) by pulling out the bottom of the panel and lowering the top away from the seat to release
the hook retainers.
4. Remove the 2 bolts (1) from the inflatable restraint side impact module bracket.
5. Remove the module from the seat.
6. Remove the connector position assurance (CPA) from the module electrical connector.