STS RWD V8-4.6L (2007)
Seat Belt Retractor: Service and Repair
Rear Seat Belt Retractor Replacement
Rear Seat Belt Retractor Replacement
Removal Procedure
Caution: Refer to Restraint System Service Precautions.
1. Remove the rear seat cushion.
2. Remove the rear seat back.
3. Remove the rear seat shoulder belt to the floor pan fastener.
4. Remove the rear trim shelf panel.
5. Remove the sail panel.
6. Remove the seat belt retractor fastener (2).
7. Remove the seat belt retractor (1).
Installation Procedure
1. Install the rear shoulder belt retractor (1). Engage the tab on the retractor (1).
Notice: Refer to Fastener Notice.
2. Install the seat belt retractor fastener (2).
Tighten the rear seat retractor fastener to 30 N.m (22 lb ft).