STS RWD V8-4.6L (2007)
Camshaft Position Sensor: Service and Repair
Camshaft Position Sensor Replacement - Bank 2 (Left Side) Exhaust
Camshaft Position Sensor Replacement - Bank 2 (Left Side) Exhaust
Removal Procedure
1. Remove the fuel injector sight shield.
Important: When disconnecting more than one sensor, mark the connectors to ensure correct installation. The electrical connectors are
physically interchangeable, however, they must be installed to the correct sensor.
2. Disconnect the electrical connector from the left bank exhaust camshaft position sensor (2).
3. Remove the camshaft sensor retaining bolt.
4. Remove the left bank exhaust camshaft sensor (4).
Installation Procedure
