STS RWD V8-4.6L (2007)
Positive: Service and Repair
Battery Positive Cable Replacement (LH2)
Removal Procedure
*
Always use replacement cables that are of the same type, diameter and length of the cables that you are replacing.
*
Always route the replacement cable the same way as the original cable.
1. Disconnect the battery negative cable (2).
2. Disconnect the battery positive cable (1) from the battery.
3. Remove the wiring harness from the retaining features on the underhood fuse block cover.
4. Depress the tabs in order to remove the underhood fuse block cover from the underhood fuse block.
