STS RWD V8-4.6L (2007)
Wheel Bearing: Service and Repair
Rear Suspension
Wheel Bearing/Hub Replacement - Rear
Tools Required
*
J 45859 Wheel Hub Remover
*
J 43631 Ball Joint Remover
Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the tire and wheel.
3. Remove the rear brake rotor.
4. Disconnect the wheel speed sensor electrical connector.
5. Disconnect the wheel speed sensor electrical connector from the backing plate.
6. Remove the wheel drive shaft retaining nut and discard.
