STS RWD V8-4.6L (2007)
Important: The case extension gasket seal is reusable. Replace the gasket ONLY if the sealing surface is damaged.
2. Install the extension housing (27) and seal (25).
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the extension housing bolts (35).
Tighten the bolts to 22 N.m (16 lb ft).
4. If equipped with AWD, install the transfer case.
5. Install the transmission support.
6. Remove the transmission jack.
7. If equipped with RWD, install the drive flange (2) and seal (3). Refer to Drive Flange and Seal Replacement.
