STS RWD V8-4.6L (2007)
6. Remove the rear TOC line to transmission retainer bolt.
7. Disconnect the rear TOC lines from the transmission.
8. Remove and discard the O-rings.
9. Remove the TOC retainer bracket bolt.
10. Remove the TOC lines.
Installation Procedure
1. Install the TOC lines.
Notice: Refer to Fastener Notice.
2. Install the TOC retainer bracket bolt.
Tighten the bolt to 16 N.m (12 lb ft).
3. Install new O-rings to the rear TOC lines.