STS RWD V8-4.6L (2007)
9. Remove the mechanics wire (2) securing front propeller shaft (1) to the shift control lever (3).
10. Install the propeller shaft coupler (1) to the transmission flange.
11. Install the exhaust system.
12. Place the transmission in the park position by rotating the shift shaft fully counter clockwise.
13. Connect the shift linkage to the transmission.
14. Install the transmission manual shift shaft nut.
Tighten the transmission manual shift shaft nut to 9 N.m (80 lb in).
15. Check the transmission fluid level. Refer to Transmission Fluid Checking.
16. Lower the vehicle.
Torque Converter Fluid Seal Replacement
Torque Converter Fluid Seal Replacement
Tools Required
*
J 8092 Universal Driver Handle
*
J 44766 Seal Installer
*
J 45000 Seal Remover
Removal Procedure
1. Remove the transmission torque converter.