STS RWD V8-4.6L (2007)
2. Install the differential cooler retaining nuts (5).
Tighten the retaining nuts to 9 N.m (80 lb in).
3. Install the hose from the differential coolant pump to the cooler.
4. Install the differential cooler wiring harness in the retainer on the frame.
5. Reconnect the electrical connector for the cooling fan (4).
6. Position the differential cooler assembly (3) in the differential carrier (7).
7. Position the coolers hoses over the rear drive axle.
8. Install the mounting nuts (2) for the differential cooler.
Tighten the mounting nuts to 9 N.m (80 lb in).
9. Remove the support for the differential cooler assembly.