STS RWD V8-4.6L (2007)
Windshield: Removal and Replacement
Windshield Replacement
Windshield Replacement
Tools Required
* J 24402-A Glass Sealant Cold Knife Remover
* J 39032 Stationary Glass Removal Tool
* J 25070 Heat Gun
* Urethane Adhesive Kit GM P/N 12346392 or Equivalent
* Isopropyl Alcohol or Equivalent
* Cartridge-type Caulking Gun
* Commercial-type Utility Knife
* Razor Blade Scraper
* Suction Cups
* Plastic Paddle
Removal Procedure
Important: Before cutting out a stationary window, apply a double layer of masking tape around the perimeter of the painted surfaces
and the interior trim.
1. Open the hood.
2. Remove the windshield wiper arms.
3. Remove the air inlet grille.
Caution: If broken glass falls into the defroster outlets, it can be blown into the passenger compartment and cause personal injury.
4. Cover the following parts to protect from broken glass:
* The upper dash pad
* The defroster outlets and A/C outlets
* The seats and carpeting
5. Remove the windshield side reveal moldings.
6. Remove the rearview mirror.
7. Remove the interior windshield garnish moldings.
Caution: Refer to Glass and Sheet Metal Handling Caution.
Important: The upper windshield reveal molding is a one-piece molding and fills the cavities between the body and windshield.
The upper windshield reveal molding cannot be reused if the molding is stretched or damaged.
