STS RWD V8-4.6L VIN A (2006)
Parking Assist Control Module: Service and Repair
OBJECT ALARM MODULE REPLACEMENT
REMOVAL PROCEDURE
1. Remove the rear upper compartment trim.
2. Release the tabs securing the rear park assist module (3) to the module bracket.
3. Disconnect the electrical connectors.
INSTALLATION PROCEDURE
1. Connect the electrical connectors.
2. Install the module (3) to the bracket.
3. Install the rear upper compartment trim.
4. Refer to Control Module References for programming and setup information. See: Testing and Inspection/Programming and Relearning
