STS RWD V8-4.6L VIN A (2006)
5. Slide the door trim panel upwards to release it from the door.
6. Disconnect the door handle cables.
Installation Procedure
1. Slide the electrical connector into position on the water deflector.
2. Connect the door handle cables.
3. Align the alignment datums (1) and the electrical connector with the door.
4. Install the door trim panel by applying pressure around the door trim panel to secure the retainers (1) to the door.
Notice: Refer to Fastener Notice in Cautions and Notices.
5. Install the door trim panel screws.
Tighten the screw to 1 N.m (9 lb in).