STS RWD V8-4.6L VIN A (2006)
Cross-Member: Service and Repair
Transmission Support Replacement
Removal Procedure
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
2. Remove and support the exhaust from the catalytic converters. Refer to Exhaust System Replacement in Engine Exhaust.
3. Remove the transmission mount lower mounting nuts.
4. Support the transmission with a screw jack and block of wood.
5. Remove the outer transmission mounting bolts.
6. Remove the inner transmission mounting bolts.
7. Remove the transmission support from the vehicle.