STS RWD V8-4.6L VIN A (2006)
7. Install the rear dome lamp bezel (1) to the headliner.
8. Loosely install the fastener.
IMPORTANT: Ensure the bolt is placed through the antenna module ground strap.
9. Install the side assist handle retainers (2).
10. Install the assist handles and loosely install the fasteners in the integral retainer clips in order to hold the handles into position.
11. Install the sunshades to the headliner.
12. Position the electrical harness between the headliner and retainer clip.
IMPORTANT: The electrical harness is placed between the headliner and the plastic retainer clip.
13. Install the metal retainer ring (2).
14. Loosely install the fasteners.
15. Connect the electrical connectors (1).
