STS RWD V8-4.6L VIN A (2006)
1. Position the base of the garnish molding to the outside of the instrument panel pad.
2. Position the molding to the windshield pillar, aligning the tabs to the retention clips on the windshield pillar.
3. Push inward on the garnish molding to secure the windshield pillar and headliner.
4. Install the fastener.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the fastener to 2 N.m (18 lb in)
5. Install the screw cover.
