STS RWD V8-4.6L VIN A (2006)
5. Raise the vehicle. Refer to Lifting and Jacking the Vehicle.
6. Remove the front air deflector retainers.
7. Remove the front air deflector.
8. Remove the engine control module (ECM) mounting nuts and reposition ECM aside.
9. Using the J 38185, disengage the tension on the hose clamp and remove the radiator outlet hose from the radiator.
10. Lower the vehicle.
11. Remove the radiator outlet hose from the vehicle.
Installation Procedure
1. Install the radiator outlet hose to the vehicle.
2. Raise the vehicle.
3. Important: Lubricate the inside diameters of the hoses with clean coolant prior to installation.
Using the J 38185, disengage the tension on the hose clamp and install the radiator outlet hose to the radiator.
4. Using the J 38185 slide the clamp into the original position.
