STS RWD V8-4.6L VIN A (2006)
8. The intermediate sprocket left bank 2 timing mark is labeled left bank (LB) as shown.
9. Assemble the secondary timing chain to the intermediate sprocket aligning the sprocket LB timing mark to the timing chain black link.
10. Locate the timing mark (1) on the front of the intake actuator marked LI which stands for left intake.
11. Align the timing mark (5) of the left bank intake camshaft position actuator with the timing chain black link (3) and install the actuator on the
camshaft with the actuator timing mark perpendicular (90°) to the cylinder head deck surface at the top of its rotation. Ensure that the camshaft
alignment pin hole on the rear of the actuator engages with the camshaft alignment pin. If necessary, use an open-end wrench on the hex cast into
the camshaft to obtain proper camshaft pin to actuator engagement.
12. Loosely install the oil control valve (10) to secure the intake actuator.
