STS RWD V8-4.6L VIN A (2006)
Engine Block Heater: Service and Repair
Coolant Heater Cord Replacement (LH2 (K05,KA3))
Coolant Heater Cord Replacement (LH2 (K05,KA3))
Removal Procedure
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
2. Disconnect the coolant heater power supply cord from the coolant heater.
3. Lower the vehicle.
4. Disconnect the coolant heater cord clips from the following:
^
The engine wiring harness conduit
^
The engine oil level indicator tube
5. Remove the coolant heater cord from the vehicle.
Installation Procedure
